DCD795D2-B3 20V Hammer Drill Li-Ion 1^2 Brushless Dewalt

DCD950KX Hammer Drill 1^2 Cordless 18V Dewalt

HR 2455 X – Rotary Hammer 1” SDS VSR

HM 0860C – Demolition Hammer

HR 2470/HR 2470 F 24mm (5/16”) Combination Hammer

Features:

1) Adapted for SDS–PLUS Bits – High durability in mechanical parts, motor and carbon brush.
2) 3 Operation modes – Hammering, hammering with rotation, rotation. Speed and torque in reverse are the same as forward rotation by using Brush Holder Unit.
3) One-Touch Sliding Chuck enables easy bit change.
4) Easy–to–operate large trigger switch lock–on button.
5) HR 2470 F features a built in LED Job Light.,
6) Capacity – Concrete : 24mm (15/16”) / Steel : 13mm (1/2”) / Wood “ 32mm (1–1/4”)
7) Impacts per Minute : 4 – 4 500/ No Load Speed (rpm) – 0–1 100    
8) Dimensions – 394 x 84 x 214mm/ Net Weight : 3.0 Kg(6.7 Lbs.)

HR 2810 T/ HR 2811 Ft 28mm (1–1/8”) Combination Hammer

Features:     

1. Adapted for SDS–PLUS bits – Quick Change keyless drill chuck : from SDS–plus to 3 jaw chuck literally in a second.
2. 3 Operation Modes – Hammering, Hammering with rotation, rotation.
3. Compact L–shaped motor housing.
4. One–Touch sliding chuck enables easy bit changes.
5. Ergonomically designed handle with rubberized soft grip provides more control and comfort.
6. HR 2811 Ft: Features a built–in LED Job Light.
7. Vibration absorbing grip.
8. Continuous rating input – 800 W
9. Capacity – Concrete (with T.C.T bit) – 28 mm (1–1/8”) / Wood – 32mm (1–1/4”)
10. Impacts per Minute     : 0 – 4 500
11. No Load Speed (rpm) : 0–1 100
12. Dimensions : HR 2811 FT : 345 x 89 x 225mm
    HR 2810T: 339 x 89 x 225mm
13. Net Weight : HR 2811 FT: 3.6 Kg (8.0Lbs.)
    HR 2810 T  : 3.5 Kg (7.8 Lbs.)

HR 3200 C 32mm (1–1/4”) Combination Hammer

Features:

1. Adapted for SDS–Plus Bits
2. 3 Operation Models – Hammering, Hammering with rotation, rotation.
3. Ergonomically designed handle with rubberized soft grip provides more control and comfort.
4. One–Touch Sliding Chuck enables easy bit change.
5. Continuous rating Input – 850 W
6. Capacity : Concrete (with T.C.T Bit) 32mm (1–1/4”)
   Steel : 13mm (1/2”)
   Wood : 32mm (1–1/4”)
7. Impacts per Minute : 1 650 – 3 000
8. No Load Speed (rpm) : 315 – 630
9. Dimensions : 398 x 108 x 239mm
10. Net Weight : 4.8 Kg (10.5 Lbs.)

HR 4002 – 40mm) 1–9/16”) Rotary Hammer

Features:

1. Adapted for SDS–Plus Max Bits
2. High Efficiency by High Speed
3. When drill bits hit against reinforcements, torque limiter operates to stop.
4. Aluminum housing provides high quality and toughness
5. 2 operation modes – Hammering with rotation and hammering only.
6. Ergonomically designed handle with rubberized soft grip provides more control and comfort.
7. One–Touch Sliding Chuck enables easy bit change.
8. Continuous rating Impact – 1 050 W
9. Capacity : Concrete (with T.C.T bit) – 40mm (1–91/6”)
   Concrete (with Core Bit) 105mm (4–1/8”)
10. Impacts per Minute – 2 500
11. No Load Speed (rpm) – 680
12. Dimensions – 458 x 114 x 256 mm
13. Net weight – 6.5 Kg (14.6 Lbs.)

HR 4510 C 45mm (1–3/4”) Rotary Hammer

Features:

1. Adapted for SDS–Max Bits
2. High performance and Low Vibration
3. 2 Operation Modes – Hammering and Hammering with rotation
4. AVT (Anti–Vibration Technology) Active Dynamic Vibration  Absorber ensures extra–low vibration performance.
5. Selectable two on/off switches on demolition mode.
6. One–Touch Sliding Chuck enables easy bit change.
7. Ergonomically designed handle with rubberized soft grip provides more control and comfort.
8. Continuous rating Input  –1 350 W
9. Capacity – Concrete (with T.C. T bit) : 45mm (1–3/4”)
   Concrete (with core bit): 125 mm (5”)
10. Impacts per Minute – 1 250 – 2 750
11. No Load Speed (rpm) – 130 – 280
12. Dimensions – 458 x 138 x 288 mm
13. Net Weight – 8.5 Kg (18.7 Lbs.)

HM 1213 C Demolition Hammer

Features:

1. Adapted for SDS–Max Bits
2. AVT (Anti–Vibration Technology) ensures extra–low vibration performance.
3. Suppression of motor speed during no–load reduces vibration of tool body.
4. One Touch sliding chuck for easy bit installation and removal.
5. Electronic speed control for maximum performance.
6. Bit can be set at 12 positions for convenience
7. LED Lamp indicates when to replace carbon brush.
8. Continuous rating Input – 1 510 W
9. Impacts per Minute – 950 – 1 900
10. Dimensions – 576 x 149 x 265 mm
11. Net Weight – 10.8 Kg (23.6 Lbs.)

HP 1640 16 mm Hammer Drill

Features:

1. Dual purpose for “Rotation only” and “Rotation with hammering”
2. New reversing system allows: Extended service life of carbon brush. No power reduction even in reversing rotation
3. In–line positive grip design maximizes power thrust
4. Large trigger switch for easy operation
5. Continuous rating Input                   – 680 W
6. Capacity– Concrete: 16 mm (5/8”)
   Steel: 13mm ( ½”)
   Wood: 30 mm ( 1–3/16”)       
7. Impacts per Minute (ipm) – 0 – 44 800
8. No Load Speed (rpm) – 0 – 2 800
9. Dimensions – 303 x 72 x 222mm
10. Net weight – 2.0 Kg (4.5 Lbs.)
11. Power Supply Cord – 2.0m (6.6 ft.)

HP 2050 20mm (3/4”) Speed Hammer Drill

Features:

1. Slender and compact body with durable metal gear housing
2. Extra–low vibration level for reduced operator fatigue
3. Dual purpose for “Rotation Only” and “Rotation with Hammering”
4. Built–in torque limier stops bit rotation when hitting reinforcements
5. Industrial strength keyed chuck
6. Continuous rating Input – 720 W
7. Capacity – Concrete : 20 mm (3/4”)
   Steel Hi  : 8mm (5/16”)
   Steel Lo  : 16 mm (5/8”)
   Wood Hi : 25 mm (1”)
   Wood Lo:  40 mm (1–9/16”)
8. Impact per Minute (ipm) – Hi : 0– 58 000
   Lo : 0– 24 000
9. No Load Speed (rpm) – Hi  : 0–2 900
   Lo : 0–1 200
10. Overall Length – 360 mm (14 –1/8”)
11. Net weight – 2.5 Kg (5.6 Lbs.)
12. Power Supply Cord – 2.5 m ( 8.2 Ft.)

HP 1500 Hammer Drill – 9/16”

Features:

HP 2050 Hammer Drill – ¾”

Features:

5740 NB – Circular Saw 7/14”

Features:

JR 3000 V Recipro Saw

Features:

3612 – Electronic Router – ½”

Feature:

JS 3200 Electric Shear

Features:

EM 4251 Petrol Hedge Trimmer – 24.5 cc

Features:

RBC 251 Petrol String Trimmer 24.5 cc

Features:

4323 Jig Saws

Features:

DPC 7341 – 350 mm (14”) Power Cutter

Features:

1. Icon of ergonomic power cutter enlarged air filter.
2. New air filter system prevents very efficient dust and dirt coming into the engine.
3. Cooling of engine improved by bigger air intake area
4. Infinite adjustable cutting guided with grip
5. Carburetor : Diaphragm type. Ignition : Electronic, Starter system : Recoil
6. Wheel Diameter – 350 mm (14”)
7. Engine – 73 mL
8. Max. Cutting Depth – 122 mm (4–3/16”)
9. No Load Speed (rpm) – 4 300
10. Circumferential speed – 80 m/s
11. Engine Power – 4.2 KW/ 5.7 PS
12. Fuel Mixture – 50:1
13. Fuel Tank – 1.1L
14. Overall Length – 800 mm (31–1/2”)
15. Net Weight – 9.7 Kg (21.4 Lbs.)

JR 3050 T Recipro Saw

Features:

1. Well-built and well balanced Mid–class
2. High cutting efficiency by powerful motor
3. Dust proof design 1 : Air from inside prevent the dust collected around slider
4. Dust proof design 2 : Ring and rubber seal protect gear room against dust
5. Tool–less blade change system
6. Push the red button for adjusting shoe positions.
7. Continuous rating Input – 1 101 W
8. Capacity – Pipe : 90 mm (3–1/2”)
9. Wood : 55mm ( 2–31/16”)
10. Length of stroke – 14 mm (9/16”)
11. Strokes per minute (spm) – 0 – 4 800
12. Dimensions – 345 x 65 x 96 mm
13. Net Weight – 1.6 Kg (3.5 Lbs.)

2414 NB  Portable Cut off Saw (Chopsaw) – 14”

Features:

4100 NH 110 mm (4–3/8”) Cutter

Features:

1. More powerful cutting in stone, masonry, tile and concrete
2. Water flow can easily be readily adjusted
3. Can be used with wet or dry type wheels
4. Continuous rating Input – 1 300 W
5. Capacity – Max. Cutting : 34mm (1–5/16”)   
6. Blade Diameter – 110 mm (4–3/8”)
7. No Load Speed (rpm) – 13 000
8. Overall Length – 234 mm (9–1/4”)
9. Net Weight – 2.9 Kg (6.5 Lbs.)
10. Power Supply Cord – 2.5 m ( 8.2 Ft.)

4101 RH Masonry Cutter

Features:

D28114 4.5 Angle Grinder 1400W Dewalt

Features:

1. Amps –13.0 Amps
2. Dust Ejection System™ –Yes
3. Max Watts Out –1,700 W
4. No Load Speed –11,000 rpm
5. Power Tool Type –Corded
6. Spindle Thread –5/8"-11
7. Switch Type –Paddle w/ lock-on
8. Tool Length –13 in
9. Tool-Free Flange System –Yes
10. Wheel Diameter –4.5" (115mm)
    

D28491-B3 7 Angle Grinder 2200W Dewalt

Features:

1. Disk –7 "
2. Watts –2.200 W
3. Speed –8,500 rpm
4. Maximum diameter disc –180 mm
5. Shaft Type –M14
6. Length –490 mm
7. Height –151 mm
8. Tool Weight –4.6 kg

9557 HN 115mm (4–1`/2”) Angle Grinder

Features:

1. High performance motor with enough power for masonry cutting and high heat resistance.
2. Labyrinth construction protects all ball bearings from dust and debris
3. Small circumference barrel grip for easy handling
4. Shaft lock for easy wheel changes
5. Easier repairing of gear section assembled with key.
6. Continuous rating Input – 840 W
7. Wheel Diameter – 115 mm (4–1/2”)
8. Abrasive Disc Diameter – 115mm  (4–1/2”)
9. Diamond Wheel Diameter – 115 mm ( 4– ½”)
10. Net Weight – 2.0 Kg (4.5 Lbs.)

GA 7050 R / GA 7050 180mm (7”) Angle Grinder

Features:

1. Most compact in its class
2. Small and rotatable gear housing
3. Large trigger switch
4. Lightweight
5. GA7050R – With anti–restart function
6. Continuous rating Input – 2 000 W
7. Wheel Diameter – 180mm (7”)
8. No Load Speed   – 8 500
9. Dimensions – GA 7050 R – 455 x 200 x 132 mm
   GA 7050    – 432 x 200 x 132 mm
10. Net Weight – GA 7050 R – 4.6 Kg (10.1.Lbs.)
    GA 7050    –  4.5 Kg ( 9.9 Lbs.)
11. Power Supply Cord – 2.5 m ( 8.2 Ft.)

2414 NB 355 mm Portable Cut–Off Saw & GA 4530 115mm
Angle Grinder ( COMBO)

Features:

1. PORTABLE CUT–OFF
2. D–Shape for easy gripping
3. Spark diversion guard for operators safety
4. Adjustable guide plate 45 degrees right and left at 3 locations
5. Quick release vise for secure stock retention and fast repeated cut–offs
6. Convenient storage space for wrench
7. Adjustable depth stops for precise, repeatable cutting depth.
8. Continuous rating Input – 2 000 W
9. Wheel Diameter – 355 mm ( 14”)
10. Hole Dia – 25.4 mm ( 1”)
11. No Load Speed (rpm) – 3 800
12. Dimensions – 500 x 280 x 600 mm
13. Net Weight – 16.9 Kg (37.1 Lbs)
14. Power Supply Cord – 2.5m ( 8.2 Ft.)

Angle Grinder

Features:

1. Small circumference barrel grip and ergonomically designed side grip angle for easy handling
2. Labyrinth construction protects all ball bearings from dust and debris
3. High quality motor with excellent heat–resistance
4. Small gear housing provides easy handling and high maneuverability.
5. Field coded with powder varnish to protect from dust.
6. Continuous rating input – 720 W
7. Wheel Diameter – 115mm (4–1/2”)
8. Abrasive disc diameter – 115mm (4–1/2”)
9. Diamond Wheel Diameter – 115 mm (4–1/2”)
10. No Load speed (rpm) – 11 000
11. Dimensions – 266 x 128 x 103 mm
12. Power supply Cord – 2.5 m (8.2 Ft.)

9005 B – Angle Grinder

Features:

GEO 600 Die Grinder

Features:

9067 L Angle Grinder

Features:

GA 700 1L Angle Grinder

Features:

9524 NB Angle Grinder – 41/2”

Features:

9564 CV Angle Grinder – 41/2”

Features:

9564 PCV – 115 mm (4–1/2”) Angle Grinder

Features:

1. Easy to operate paddle type on/off switch
2. New field with superior wiring technology leads to higher wattage without motor–size expansion
3. Super Joint System absorbs shock caused by accidental wheel ock and protects gears
4. More durable gears and bearings
5. Rotation speed is selectable to work piece
6. Continuous rating Input – 1 400 W
7. Wheel Diameter – 115 mm (4–1/2”)
8. No Load Speed (rpm) – 2 800 – 11 500
9. Dimensions – 307 x 129 x 103 mm
10. Net Weight – 2.4 Kg (5.3Lbs.)
11. Power Supply Cord – 2.5 m ( 8.2 Ft.)

GB 600 Bench Grinder

Features:

GB 601 Bench Grinder

Features:

Pressure Washers:

12501205 – PW 1400 – B3 – 1400 Watts

12501207 – PW 1700 – B3 – 1700 Watts

CV-2600-OMMC Pressure Washer

PSI –2600

GPM –2.2

Displacement/ Engine –170cc Mi-T-M OHV

Water Heaters:

ES–6–40 – 20 Gallons – AO Smith

ES–6–40 – 20 Gallons – State Select

ES–6–40 – 30 Gallons – Reliance 606

ES–6–40 – 40 Gallons – State Select

ES–6–40 – 30 Gallons – State Select

Tankless Water Heater DHC E8–10

Water Pumps:

Pentax Pumosus – CAM 50 with 8 Litre Tank – Self Primina

Pentax Pumosus – CAM 50 with 18 Litre Tank – SVS Self Primina – SO 60 PEN–A– 02]

Pentax SVS Centrifugal Ultra – U3 80/3 with 18 Litre Tank – PUM – SO– 75 PEN–C–02

Pentax Pumosus – Self Primina – CAM 50 with Smart Head

Pentax SUS– Self Primina – CAM 50 – SO – 60 PEN –A– 06
With Smart Head

Pentax Pumosus – Centrifugal Ultra – U3 80/3 with Smart Head

Plu– Pump C/L Minimatic Switch

Goulds Water Pumps:

JRS 5 – ½ HP

J5S – ½ HP

J7S – ¾ HP

J105 – 1 HP

J155 – 11/2 HP

EW 220 ST Pump – 50 mm (2”) Suction/Discharge

Features:

1. Semi trash pumps are designed for light applications, but can be used for most of the application, where Trash pumps are being used
2. Suction & Discharge Diameter – 50 mm (2”)
3. Max. pumping capacity – 700 L / min (185 gal/min)
4. Fuel Tank – 2.7 L
5. Engine Model – EX 13 (126mL)
6. Dimensions – 468 x 357 x 399 mm
7. Net Weight – 25 Kg (55.1 Lbs.)

BHR 202  20mm (13/16”) Cordless Combination Hammer

Features:

1. Adapted for SDS–PLUS Bits
2. Light weight although being a 3–mode rotary hammer
3. 3 Operation modes – Hammering, Hammering with rotation, rotation
4. Ergonomically designed handle with rubberized grip provides more control and comfort
5. One–Touch sliding chuck for easy bit changes
6. Anti–slip rubberized side grip
7. Chisel can rotate full 40 different locking positions without using chisel adapter.
8. Capacity – Concrete: 20mm (13/16”)
   Steel: 13 mm (1/2”)
   Wood: 26 mm (1”)
9. Impacts per Minute: 0 – 4 000
10. No Load Speed (rpm): 0– 1 100
11. Dimensions: 358 x 84 x 259 mm
12. Net weight: 3.5 Kg (7.7 Lbs.)

BGA 452 – 115 mm (4–1/2”) Cordless Angle Grinder

Features:

1. Powerful angle grinder now free from cord.
2. Capable of using wheels / discs for AC Grinders
3. Esay–to–grip, small circumference motor housing
4. Anti–restart function for safety (with warning lamp)
5. Electronic current limiter (with warning lamp)
6. Wheel Diameter – 115 mm (4–1/2”)
7. Abrasive Disc Diameter – 115 mm (4 – ½”)
8. Diamond Wheel Diameter – 11 5 mm ( 4 –1/2”)
9. No Load Speed (rpm) – 10 000
10. Dimensions – 317 x 129 x 126 mm
11. Net Weight – 1.9 Kg (4.2 Lbs.)

G1100 Generator

Features:

1. Top class lightweight in the world
2. Easy and secure operation
3. Voltage regulation : AVR alternator type/ Starting system : Recoil
4. Fuel Tank – 4.0 L
5. Engine Model – EH09 (85.8mL)
6. AC Output – 50/60 Hz : 0.7 / 0.9 KVA
7. Max. AC Output VA – 50/60 Hz : 0.85/ 1.1 KVA
8. Continuous use (hours) – 50/60 Hz : 4.3/4.2
9. Dimensions – 490 x 295 x 445 mm   
10. Net Weight – 28.0 Kg ( 61.7 Lbs.)

EG 712 AE Generator

Features:

1. High performance generators by OHC engine and AVR alternator.
2. Powerful EX engine series with sophisticated OHC system
3. Starting system : Recoil, Electric
4. Silent muffler achieve quiet operation
5. Extremely easy maintenance
6. Durable steel front panel.
7. Fuel Tank – 16 L
8. Engine Model – EX35 (404mL)
9. AC Output – 60 Hz : 5.0 KVA
10. Max. AC Output VA – 60 Hz : 7.1 KVA
11. Dimensions – 975 x 534 x 580 mm
12. Net Weight – 99 Kg ( 218 Lbs)

BO 3700 – Finishing Sanders

Features:

9403- Belt Sander 4” x 24”

Features:

9903– Belt Sander – 3” x 21”

Features:

BO 5010 – Orbit Sander

Features:

MAC 700 – Air Compressor – 2 Horse power

Features:

19010 6.6Gal Air Compressor Truper

Features:

AF 503 – Brad Nailer

Features:

HG 1100 Heat Gun

Features:

HM 1810 Electric Breaker – 1–1/8” : 28.6mm Hex Shank

Features:

1. Lowest–in–class vibration.
2. Highest–in–class demolition efficiency 
3. AVT: Counter weight mechanism helps to reduce vibration
4. Highly recommended to manage exposure of vibration to the body
5. Continuous rating Input – 2 000 W
6. Impacts per Minute (ipm) – 1 100
7. Dimensions – 824 x 148 x 624 mm
8. Net Weight – 32.3 Kg (71.3Lbs.)
9. Power supply Cord – 5.0m (16.4 Ft.)

6821 Drywall Screwdriver

Features:

6825 Drywall Screwdriver

Features:

6826 Drywall Screwdriver

Features:

6827 Drywall Screwdriver

Features: