Roofing Materials

Currently In Stock:

Beams

Roofing Beams - ASTM / A52 Grade 50

2” x 4” x 4.5 Lbs/ft. x 20 Feet

2” x 4”x 4.5Lbs/Ft. x 30 Feet
2” x 4” x 5.5Lbs/Ft. x 20 Feet
2” x 4”x 5.5Lbs/Ft. x 30 Feet
5” x 3” x 9 Lbs/Ft. x 20 Feet
5” x 3” x 9 Lbs/Ft. x 30 Feet

Z Perlins

Cut to any length required up to 35 feet – 1.5mm thick.

2” x 4”
2” x 6”
2’ x 7”
2” x 8”
2” x 10”

 

C Perlins

Cut to any length required up to 35 feet – 1.5mm thick.

2” x 4”
2” x 6”
2” x 8”

 

Sag Rods

To Required Length/ Threaded 4” Both Sides With 2 Nuts/2 Washers Each Side.

¼”  / 3/8” / ½” / 5/8” / ¾” / 1” – DIAMETER

 

Cleats

With Two Holes Drilled To Diameter Required Using Requested Material Thickness And Measurements.

 

Roofing Sheets

Normal/ Profiled Corrugation/ Painted/ Unpainted.

Cut To Required Lengths Up To 35 Feet

28 / 26 / 24 GAUGE

 

Flashing

Painted/ Unpainted.

10 Feet Lengths With Required Bends As Per Your Drawings.

28 / 26 / 24 GAUGE

 

Ridge Caps

For  Normal/ Profiled Corrugation Sheets/ Painted /Unpainted.

10 Feet Lengths With Required Width As Per Your Drawings.

28 / 26 / 24 GAUGE

 

Drip Edge

10 Feet Lengths With Required Width As Per Your Drawings.

4” / 6”

Tech Point & Stitch Screws Also Available
 
Additional Sizes / Quality/Grade For Roofing Material Can Be Sourced And Quoted On.

 

Bolts and Nuts

Bolts/Nuts/Washers

 
Grade 2 & 5 Hex Head up to 1in diameter in various lengths.
 
 

Construction Bolts

Black Finish - UNC: Conforms to A325 Standards.

½in – 2in, 21/2in, 3in, 4in, 5in
5/8in – 2in, 21/2in, 3in, 4in
¾in – 2in, 21/2in , 3in, 4in
1in – 21/2in, 3in, 31/2in, 4in

Hot Dipped Galvanized - UNC.

½in – 2in, 21/2in, 3in
5/8in – 2in, 21/2in, 3in, 31/2in
¾in – 2in, 21/2in, 3in
1in – 2/12in, 3in, 31/2in, 4in

We also Have a wide range of:

Washer faced, copper coated, square head, lock seal, lock, left hand threaded & split pin nuts (UNC & UNF).
12 Flange point screws (UNC &UNF)
Socket Head Cap Screws
Zinc Coated Bolts & Nuts
Heavy Hex Nuts Plain & Hot Dipped Galvanized
Flat, plate & lock washers
Zinc Coated Metric Bolts
Hex head lag bolts
Socket Set Screws UNC & UNF
Square Head Bolts

For Further Information, Please Contact Our Sales Representatives at Telephone#: (868) 636-7991/2/5, (868) 636-6028/34, (868) 679-3261, (868) 387-0418/19/20 OR Click Here.